Swimming Pool Maintenance Guide: Keep Your Pools Safe

Building your own swimming pool can be a considerable investment. To protect your investment, you need to keep it maintained so you can make the most of it and avoid Lifeguard training near me problems that cost big bucks later on. To do this, it’s best to follow a regular swimming pool maintenance guide so you make sure you can do the necessary tasks on schedule.

A good swimming pool maintenance guide covers not just the care of your pool, but also the necessary adjustments to the water chemistry to keep it safe for swimming. It’s difficult to keep kids out of the pool, especially in the summer months, and you do not want them to swim in contaminated pool water.

Swimming Pool Maintenance Guide for Pool Water

You should closely monitor two properties in your pool water. These are:

-Chlorine Level – This should not fall under 1ppm or germs and algae will start to grow in your pool. The ideal level is between 1 and 3ppm. It is best to check this every day. It is also advised to shock your pool once a week to break down organic pollution. A shock means bringing your chlorine levels between 6 and 10ppm.

-pH Level – Ideal reading is between 7.2 and 7.6. This should also be checked every day. If the pH goes above 7.8, you will have a scale buildup, which will lead to problems in your filter and also affect the efficiency of your chlorine. A low pH, on the other hand, will corrode your pipes and rapidly consume the residual chlorine present in the water.

Other water properties to check are the calcium and alkalinity levels. Alkalinity affects the pH of the water and calcium affects the hardness. A high PPM of calcium leads to cloudy water. You can adjust all of these with chemical testers, just be careful about handling them. Rule of thumb is to add chemicals to water, not the other way around.

Swimming Pool Maintenance Guide for Pool Hardware

Aside from keeping chemically balanced water, a swimming pool maintenance guide should also teach you the proper schedule of operation and maintenance of the pool’s hardware. Here are the basics:

-Check and clean the skimmer basket weekly. You may have to do this more frequently if the pool is often used. Remove all debris so that the basket can do its job efficiently.

-Run your filter for about 6 to 8 hours a day Lifeguard training near me during the summer, and 2 to 4 hours a day during winter.

-You should backwash your filter to remove all the debris they have collected. This helps it work more efficiently and lengthen the life. Frequency will depend on how often you use the pool.

-Vacuum your pool once a week to remove solids from the floor.

-Brush the sides and floor to remove any algae that is starting to build up. They can discolor your tiles and makes them slippery as well.

-Check the water level to ensure that your pump is sucking water and not air, which can damage it.

This swimming pool maintenance guide provides you with the basics. Talk to a professional to give you a customized guide based on the size of your pool and your swimming habits.